From voice to ink (Vink): development and assessment of an automated, free-of-charge transcription tool.

BACKGROUND: Verbatim transcription of qualitative audio data is a cornerstone of analytic quality and rigor, yet the time and energy required for such transcription can drain resources, delay analysis, and hinder the timely dissemination of qualitative insights. In recent years, software programs have presented a promising mechanism to accelerate transcription, but the broad application of such programs has been constrained due to expensive licensing or "per-minute" fees, data protection concerns, and limited availability of such programs in many languages. In this article, we outline our process of adapting a free, open-source, speech-to-text algorithm (Whisper by OpenAI) into a usable and accessible tool for qualitative transcription. Our program, which we have dubbed "Vink" for voice to ink, is available under a permissive open-source license (and thus free of cost). RESULTS: We conducted a proof-of-principle assessment of Vink's performance in transcribing authentic interview audio data in 14 languages. A majority of pilot-testers evaluated the software performance positively and indicated that they were likely to use the tool in their future research. Our usability assessment indicates that Vink is easy-to-use, and we performed further refinements based on pilot-tester feedback to increase user-friendliness. CONCLUSION: With Vink, we hope to contribute to facilitating rigorous qualitative research processes globally by reducing time and costs associated with transcription and by expanding free-of-cost transcription software availability to more languages. With Vink running on standalone computers, data privacy issues arising within many other solutions do not apply.

Wax screen-printable ink for massive fabrication of negligible-to-nil cost fabric-based microfluidic (bio)sensing devices for colorimetric analysis of sweat.

Fabric-based microfluidic analytical devices (µADs) have emerged as a promising material for replacing paper µADs thanks to their superior properties in terms of stretchability, mechanical strength, and their wide scope of applicability in wearable devices or embedded in garments. The major obstacle in their widespread use is the lack of a technique enabling their massive fabrication at a negligible-to-nil cost. In response, we report the development of a wax ink with proper thixotropic and hydrophobic properties, fully compatible with automatic screen-printing that allows the one step massive fabrication of microfluidics on a cotton/elastane fabric, with a printing resolution 400 µm (hydrophilic channel) and 1000 µm (hydrophobic barrier), without being necessary any post curing. The cost of the ink (50 g) and of each microfluidic device is ca. 2.3 and 0.007 €, respectively. The active component of the ink was a refined beeswax in a matrix based on ethyl cellulose in 2-butoxy ethyl acetate. Screen-printed fabric µADs were used for the simultaneous colorimetric determination of pH and urea in untreated human sweat by using multivariate regression analysis. This method enabled the direct measurement of urea using urease, regardless of the sweat's pH, and shows strong agreement with a reference method.

Integrated Ink Printing Paper Based Self-Powered Electrochemical Multimodal Biosensing (IFP-Multi ) with ChatGPT-Bioelectronic Interface for Personalized Healthcare Management.

Personalized healthcare management is an emerging field that requires the development of environment-friendly, integrated, and electrochemical multimodal devices. In this study, the concept of integrated paper-based biosensors (IFP-Multi ) for personalized healthcare management is introduced. By leveraging ink printing technology and a ChatGPT-bioelectronic interface, these biosensors offer ultrahigh areal-specific capacitance (74633 mF cm-2 ), excellent mechanical properties, and multifunctional sensing and humidity power generation capabilities. More importantly, the IFP-Multi devices have the potential to simulate deaf-mute vocalization and can be integrated into wearable sensors to detect muscle contractions and bending motions. Moreover, they also enable monitoring of physiological signals from various body parts, such as the throat, nape, elbow, wrist, and knee, and successfully record sharp and repeatable signals generated by muscle contractions. In addition, the IFP-Multi devices demonstrate self-powered handwriting sensing and moisture power generation for sweat-sensing applications. As a proof-of-concept, a GPT 3.5 model-based fine-tuning and prediction pipeline that utilizes recorded physiological signals through IFP-Multi is showcased, enabling artificial intelligence with multimodal sensing capabilities for personalized healthcare management. This work presents a promising and ecofriendly approach to developing paper-based electrochemical multimodal devices, paving the way for a new era of healthcare advancements.

Image-based assessment and machine learning-enabled prediction of printability of polysaccharides-based food ink for 3D printing.

Despite the growing demand and interest in 3D printing for food manufacturing, predicting printability of food-grade materials based on biopolymer composition and rheological properties is a significant challenge. This study developed two image-based printability assessment metrics: printed filaments' width and roughness and used these metrics to evaluate the printability of hydrogel-based food inks using response surface methodology (RSM) with regression analysis and machine learning. Rheological and compositional properties of food grade inks formulated using low-methoxyl pectin (LMP) and cellulose nanocrystals (CNC) with different ionic crosslinking densities were used as predictors of printability. RSM and linear regression showed good predictability of rheological properties based on formulation parameters but could not predict the printability metrics. For a machine learning based prediction model, the printability metrics were binarized with pre-specified thresholds and random forest classifiers were trained to predict the filament width and roughness labels, as well as the overall printability of the inks using formulation and rheological parameters. Without including formulation parameters, the models trained on rheological measurements alone were able to achieve high prediction accuracy: 82% for the width and roughness labels and 88% for the overall printability label, demonstrating the potential to predict printability of the polysaccharide inks developed in this study and to possibly generalize the models to food inks with different compositions.

3D Bioprinting of Diatom-Laden Living Materials for Water Quality Assessment.

Diatoms have long been used as living biological indicators for the assessment of water quality in lakes and rivers worldwide. While this approach benefits from the great diversity of these unicellular algae, established protocols are time-consuming and require specialized equipment. Here, this work 3D prints diatom-laden hydrogels that can be used as a simple multiplex bio-indicator for water assessment. The hydrogel-based living materials are created with the help of a desktop extrusion-based printer using a suspension of diatoms, cellulose nanocrystals (CNC) and alginate as bio-ink constituents. Rheology and mechanical tests are employed to establish optimum bio-ink formulations, whereas cell culture experiments are utilized to evaluate the proliferation of the entrapped diatoms in the presence of selected water contaminants. Bioprinting of diatom-laden hydrogels is shown to be an enticing approach to generate living materials that can serve as low-cost bio-indicators for water quality assessment.

Comparison of properties and cost efficiency of zirconia processed by DIW printing, casting and CAD/CAM-milling.

OBJECTIVES: The aim of this study was to evaluate the mechanical properties and cost efficiency of direct ink writing (DIW) printing of two different zirconia inks compared to casting and subtractive manufacturing. METHODS: Zirconia disks were manufactured by DIW printing and the casting process and divided into six subgroups (n = 20) according to sintering temperatures (1350 °C, 1450 °C and 1550 °C) and two different ink compositions (Ink 1, Ink 2). A CAD/CAM-milled high strength zirconia (3Y-TZP) was added as reference group. The biaxial flexural strength (BFS) was measured using the piston-on-three-balls test. X-ray-diffraction (XRD) was used for microstructural analysis. The cost efficiency was compared for DIW printing and subtractive manufacturing by calculation of the manufacturing costs of one dental crown. RESULTS: Using XRD, monoclinic and tetragonal phases were detected for Ink 1, for all other groups no monoclinic phase was detected. The CAD/CAM-milled ceramic showed a significantly higher BFS than all other groups. The BFS of Ink 2 was significantly higher than the BFS of Ink 1. At a sintering temperature of 1550 °C the mean BFS of the printed Ink 2 was 822 ± 174 MPa. The BFS of the cast materials did not show a significantly higher BFS than the corresponding printed group for any tested parameter-set. The manufacturing costs of DIW printed crowns are lower than the manufacturing costs of CAD/CAM-milled crowns. CONCLUSION: DIW has a high potential to replace subtractive processes for dental applications, as it shows promising mechanical properties for appropriate ink compositions and facilitates a highly cost effective production.

High resolution and fidelity 3D printing of Laponite and alginate ink hydrogels for tunable biomedical applications.

The formulation of hydrogels that meet the necessary flow characteristics for their extrusion-based 3D printing while providing good printability, resolution, accuracy and stability, requires long development processes. This work presents the technological development of a hydrogel-based ink of Laponite and alginate and evaluates its printing capacity. As a novelty, this article reports a standardizable protocol to quantitatively define the best printing parameters for the development of novel inks, providing new printability evaluation parameters such as the Printing Accuracy Escalation Index. As a result, this research develops a printable Laponite-Alginate hydrogel that presents printability characteristics. This ink is employed for the reproducible manufacture of 3D printed scaffolds with versatile and complex straight or curved printing patterns for a better adaptation to different final applications. Obtained constructs prove to be stable over time thanks to the optimization of a curing process. In addition, the study of the swelling and degradation behavior of the Laponite and alginate 3D printed scaffolds in different culture media allows the prediction of their behavior in future in vitro or in vivo developments. Finally, this study demonstrates the absence of cytotoxicity of the printed formulations, hence, setting the stage for their use in the field of biomedicine.

Coformulation with Tattoo Ink for Immunological Assessment of Vaccine Immunogenicity in the Draining Lymph Node.

Characterization of germinal center B and T cell responses yields critical insights into vaccine immunogenicity. Nonhuman primates are a key preclinical animal model for human vaccine development, allowing both lymph node (LN) and circulating immune responses to be longitudinally sampled for correlates of vaccine efficacy. However, patterns of vaccine Ag drainage via the lymphatics after i.m. immunization can be stochastic, driving uneven deposition between lymphoid sites and between individual LN within larger clusters. To improve the accurate isolation of Ag-exposed LN during biopsies and necropsies, we developed and validated a method for coformulating candidate vaccines with tattoo ink in both mice and pigtail macaques. This method allowed for direct visual identification of vaccine-draining LN and evaluation of relevant Ag-specific B and T cell responses by flow cytometry. This approach is a significant advancement in improving the assessment of vaccine-induced immunity in highly relevant nonhuman primate models.

Curing of UV prints - Assessment of possible toxicological hazard for consumers.

In an experimental setting a laboratory analysis of substances migrating from UV prints under mechanical stress into sweat and saliva simulant was performed. The influence of paper type and curing degree on UV prints was investigated. Five substances were identified at concentrations above the limit of detection in the simulants PPG-3 glyceryl triacrylate, ethoxylated trimethylolpropane triacrylate, trimethylolpropane triacrylate, 2/4-isopropylthioxanthone (ITX), and 2,4-diethylthioxanthone (DETX). Migration of the acrylates and photoinitiators into saliva and sweat simulants were increased when the UV inks were printed on uncoated paper in comparison to coated paper. With an exposure scenario considering a person to leaf through 80 pages of UV-printed paper per day while touching each page with a licked fingertip, Risk Characterisation Ratios (RCR) for oral exposure well below 1 were obtained for all five substances indicating no risk for the general population. The three acrylates are classified for skin sensitisation. The migrated amounts per skin surface area of these three were compared with the EC3 value for a hypothetical substance that could be categorised as strong sensitiser (EC3 = 0.1%). The results show that the risk of skin sensitisation even under worst case conditions can be considered as negligible.

Assessment of cytotoxicity and sensitization potential of intradermally injected tattoo inks in reconstructed human skin.

BACKGROUND: The number of people within the European population having at least one tattoo has increased notably, and with it the number of tattoo-associated clinical complications. Despite this, safety information and testing regarding tattoo inks remain limited. OBJECTIVE: To assess cytotoxicity and sensitization potential of 16 tattoo inks after intradermal injection into reconstructed human skin (RHS). METHODS: Commercially available tattoo inks were injected intradermally into RHS (reconstructed epidermis on a fibroblast-populated collagen hydrogel) using a permanent makeup device. RHS biopsies, tissue sections, and culture medium were assessed for cytotoxicity (thiazolyl blue tetrazolium bromide assay [MTT assay]), detrimental histological changes (haematoxylin and eosin staining), and the presence of inflammatory and sensitization cytokines (interleukin [IL]-1α, IL-8, IL-18; enzyme-linked immunosorbent assay). RESULTS: Varying degrees of reduced metabolic activity and histopathological cytotoxic effects were observed in RHS after ink injection. Five inks showed significantly reduced metabolic activity and enhanced sensitization potential compared with negative controls. DISCUSSION: Using the RHS model system, four tattoo inks were identified as highly cytotoxic and classified as potential sensitizers, suggesting that allergic contact dermatitis could emerge in individuals carrying these inks. These results indicate that an RHS-based assessment of cytotoxicity and sensitization potential by intradermal tattoo ink injection is a useful analytical tool to determine ink-induced deleterious effects.

Luminescent Ink Based on Upconversion of NaYF4:Er,Yb@MA Nanoparticles: Environmental Friendly Synthesis and Structural and Spectroscopic Assessment.

NaYF4:Er,Yb upconversion luminescent nanoparticles (UCNPs) were prepared by hydrothermal methods at 180 °C for 24 h. The X-ray diffraction (XRD) and TEM (transmission electron microscopy) images show that the resulting 60 nm UCNPs possess a hexagonal structure. In this work, maleic anhydride (MA) was grafted on the surface of UCNPs to induce hydrophilic properties. The photoluminescence spectra (PL) show upconversion emissions centered around 545 nm and 660 nm under excitation at 980 nm. The luminescent inks, including UCNPs@MA, polyvinyl alcohol (PVA), deionized water (DI), and ethylene glycol (EG), exhibit suitable properties for screen printing, such as high stability, emission intensity, and tunable dynamic viscosity. The printed patterns with a height of 5 mm and a width of 1.5 mm were clearly observed under the irradiation of a 980 nm laser. Our strategy provides a new route for the controlled synthesis of hydrophilic UCNPs, and shows that the UCNPs@MAs have great potential in applications of anti-counterfeiting packing.

Antidelaminating, Thermally Stable, and Cost-Effective Flexible Kapton Platforms for Nitrate Sensors, Mercury Aptasensors, Protein Sensors, and p-Type Organic Thin-Film Transistors.

The inkjet printing of metal electrodes on polymer films is a desirable manufacturing process due to its simplicity but is limited by the lack of thermal stability and serious delaminating flaws in various aqueous and organic solutions. Kapton, adopted worldwide due to its superior thermal durability, allows the high-temperature sintering of nanoparticle-based metal inks. By carefully selecting inks (Ag and Au) and Kapton substrates (Kapton HN films with a thickness of 135 µm and a thermal resistance of up to 400 °C) with optimal printing parameters and simplified post-treatments (sintering), outstanding film integrity, thermal stability, and antidelaminating features were obtained in both aqueous and organic solutions without any pretreatment strategy (surface modification). These films were applied in four novel devices: a solid-state ion-selective (IS) nitrate (NO3-) sensor, a single-stranded DNA (ssDNA)-based mercury (Hg2+) aptasensor, a low-cost protein printed circuit board (PCB) sensor, and a long-lasting organic thin-film transistor (OTFT). The IS NO3- sensor displayed a linear sensitivity range between 10-4.5 and 10-1 M (r2 = 0.9912), with a limit of detection of 2 ppm for NO3-. The Hg2+ sensor exhibited a linear correlation (r2 = 0.8806) between the change in the transfer resistance (RCT) and the increasing concentration of Hg2+. The protein PCB sensor provided a label-free method for protein detection. Finally, the OTFT demonstrated stable performance, with mobility values in the linear (µlin) and saturation (µsat) regimes of 0.0083 ± 0.0026 and 0.0237 ± 0.0079 cm2 V-1 S-1, respectively, and a threshold voltage (Vth) of -6.75 ± 3.89 V.

Printability assessment of psyllium husk (isabgol)/gelatin blends using rheological and mechanical properties.

The primary goal of this study is to highlight the rheological and mechanical properties of a new blend composed of naturally-derived hydrogel materials- psyllium husk (PH) and gelatin (G) for its potential use in three-dimensional (3D) printing technology. The mixtures were prepared at various weight ratios of 100PH, 75PH + 25G and 50PH + 50G. A suitable selection of the printable ink was made based on the preliminary screening steps of manual filament drop test and layer stacking by 3D printing. Printing of the common features such as hexagon and square grids helped evaluating shape fidelity of the chosen ink. Although 50PH + 50G blend was found meeting most of the criteria for an ideal 3D printable ink, rheological and mechanical characterizations have been performed for all the ratios of polymeric blends. This study documents the correlation between various factors of rheology that should be taken into account while categorizing any biomaterial as a printable ink. Yield stress was measured as 18.59 ± 4.21 Pa, 268.74 ± 13.56 Pa and 109.16 ± 9.85 Pa for 50PH + 50G, 75PH + 25G and 100PH, respectively. Similarly, consistency index (K) and flow index (n) were calculated using the power law equation and found as 49.303 ± 4.17, 530.59 ± 10.92, 291.82 ± 10.53 and 0.275 ± 0.04, 0.05 ± 0.005, 0.284 ± 0.04 for 50PH + 50G, 75PH + 25G and 100PH, respectively. The loss modulus (G″) was observed dominating over storage modulus (G') for 50PH + 50G, that depicts its liquid-like property; whereas storage modulus (G') was found dominating in case of 75PH + 25G and 100PH, indicating their solid-like characteristics. In addition, the loss tangent value (tan δ) of 50PH + 50G was observed exceeding unity (1.05), supporting its plastic behavior, unlike 75PH + 25G (0.5) and 100PH (0.33) whose loss tangent values were estimated less than unity revealing their elastic behavior. Also, 50PH + 50G was found to have the highest mechanical strength amongst the three blends with a Young's modulus of 9.170 ± 0.0881 kPa.

Inkjet-printed PEDOT:PSS multi-electrode arrays for low-cost in vitro electrophysiology.

Multi-electrode arrays (MEAs) have become a key element in the study of cellular phenomena in vitro. Common modern MEAs are still based on costly microfabrication techniques, making them expensive tools that researchers are pushed to reuse, compromising the reproducibility and the quality of the acquired data. There is a need to develop novel fabrication strategies, able to produce disposable devices that incorporate advanced technologies beyond the standard metal electrodes on rigid substrates. Here we present an innovative fabrication process for the production of polymer-based flexible MEAs. The device fabrication exploited inkjet printing, as this low-cost manufacturing method allows for an easy and reliable patterning of conducting polymers. Poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) was used as the sole conductive element of the MEAs. The physical structure and the electrical properties of the plastic/printed MEAs (pMEAs) were characterised, showing a low impedance that is maintained also in the long term. The biocompatibility of the devices was demonstrated, and their capability to successfully establish a tight coupling with cells was proved. Furthermore, the pMEAs were used to monitor the extracellular potentials from cardiac cell cultures and to record high quality electrophysiological signals from them. Our results validate the use of pMEAs as in vitro electrophysiology platforms, pushing for the adoption of innovative fabrication techniques and the use of new materials for the production of MEAs.

La iniciativa paperless, innovación al servicio de la conservación del medio ambiente / The paperless initiative, innovation at the service of environmental conservation

La presente investigación tuvo por objetivo establecer las relaciones de la innovación en las tecnologías de la comunicación e información así como la evolución de los formatos móviles con la creación de propuestas que se presenten como alternativas ecológicas al uso del papel, a través de la revisión bibliográfica y de experiencias alrededor del mundo que logran sustentar la iniciativa paperless como una alternativa para el desarrollo sostenible y el equilibrio ambiental gracias a la reducción del consumo de papel a través de la migración al uso de archivos digitales en oficinas y sitios de trabajo con gran volumen de consumo de papel, casos como el de Axtel en México y las propuestas del MIT con la creación de tintas digitales, fungen como sustento de las innovaciones en función del medio ambiente. Entre los resultados encontrados se presenta la necesidad de ir más allá de los esfuerzos que se han iniciado en América Latina para crear una cultura del reciclaje e incentivar a la población a utilizar las tecnologías desarrolladas para la sustitución del papel como método de reducción de la explotación ambiental.

The objective of this research was to establish the relationships of innovation in communications and information technologies as well as the evolution of mobile formats with the creation of proposals that are presented as ecological alternatives to the use of paper, through the literature review and experiences around the world that support the paperless initiative as an alternative to sustainable development and environmental balance by reducing paper consumption through migration to the use of digital files in offices and workplaces with large volume of paper consumption. Cases such as Axtel in Mexico and the proposals at MIT with the creation of digital inks, serve as support of innovations according to the environment. The need to go beyond the efforts that have been initiated in Latin America to create a culture of recycling and encourage people to use the technologies developed for the replacement of paper as a method of reducing environmental exploitation are important findings of this research.

Assessment of Toxic Metals and Hazardous Substances in Tattoo Inks Using Sy-XRF, AAS, and Raman Spectroscopy.

Synchrotron radiation X-ray fluorescence spectroscopy, in conjunction with atomic absorption and Raman spectroscopy, was used to analyze a set of top brand tattoo inks to investigate the presence of toxic elements and hazardous substances. The Cr, Cu, and Pb contents were found to be above the maximum allowed levels established by the Council of Europe through the resolution ResAP(2008)1 on requirements and criteria for the safety of tattoos and permanent makeup. Raman analysis has revealed the presence of a set of prohibited substances mentioned in ResAP(2008)1, among which are the pigments Blue 15, Green 7, and Violet 23. Other pigments that were identified in white, black, red, and yellow inks are the Pigment White 6, Carbon Black, Pigment Red 8, and a diazo yellow, respectively. The present results show the importance of regulating tattoo ink composition.

Innovations in counterfeiting tax stamps: a study of ultraviolet watermarks in a sample of discarded New York City packs.

OBJECTIVE: Document the use of ultraviolet watermark in counterfeit joint New York City/New York State cigarette tax stamps to assess the scale at which distributors of illegal cigarettes adapt to measures protecting the integrity of the system of tobacco tax collection. METHODS: In 2016, we collected 2357 empty discarded cigarette packs along a stratified random sample of block groups in New York City (n=114) and analysed 449 joint New York City/New York State tax stamps using long wave ultraviolet irradiation, light microscopy and taggant testers developed by the tax stamp manufacturer, Meyercord Revenue, to determine whether the tax stamps were counterfeit and how they differed from their genuine equivalent. FINDINGS: 23% (n=102) of the joint NYC/NYS tax stamps examined were counterfeit. Subsequent investigation revealed that almost two-thirds (n=58) of the counterfeit sample bore ultraviolet watermark that closely resembled genuine tax stamps in terms of fluorescence, watermark colour and wording. However, microscopic findings revealed that counterfeit tax stamps mismatched the genuine ultraviolet watermark in regards to font style and word orientation. CONCLUSION: Counterfeiters are using ultraviolet watermarks which makes it difficult to differentiate counterfeit joint New York City/New York State tax stamps from their genuine equivalent when UV irradiation is used as the sole screening tool. Innovations in counterfeiting technology may be the result of fluorescent ink being available for purchase in the mainstream market. Independent monitoring of trends in the illicit market for tobacco products is advised to keep apace of counterfeiting methods.

Skin color-specific and spectrally-selective naked-eye dosimetry of UVA, B and C radiations.

Spectrally-selective monitoring of ultraviolet radiations (UVR) is of paramount importance across diverse fields, including effective monitoring of excessive solar exposure. Current UV sensors cannot differentiate between UVA, B, and C, each of which has a remarkably different impact on human health. Here we show spectrally selective colorimetric monitoring of UVR by developing a photoelectrochromic ink that consists of a multi-redox polyoxometalate and an e- donor. We combine this ink with simple components such as filter paper and transparency sheets to fabricate low-cost sensors that provide naked-eye monitoring of UVR, even at low doses typically encountered during solar exposure. Importantly, the diverse UV tolerance of different skin colors demands personalized sensors. In this spirit, we demonstrate the customized design of robust real-time solar UV dosimeters to meet the specific need of different skin phototypes. These spectrally-selective UV sensors offer remarkable potential in managing the impact of UVR in our day-to-day life.